Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Smart
    3. :
  3. Forfour
    4. : How do you remove the rear door panel of the Smart Forfour?

Smart Forfour - Video tutorial

Model: Smart Forfour W454, MK 1 - Years 2004-2006
Part: Door panel
Operation: How do you remove the rear door panel of the Smart Forfour?

In order to remove the rear door panel of the Smart Forfour, you need to completely detach the plastic trim located near the side mirror: by loosening this trim, you can loosen the screws that secure the panel. Then you can also loosen the screws located on the side of the door and at the bottom right of the panel: by removing all these screws, you can detach the panel and disconnect the underlying connectors. This way you can position the new panel and secure it with the appropriate screws.


Posted on 11 May 2024 by ScegliAuto



Remove the exterior door panel on a Smart Forfour
Smart Forfour (2004-2006 / W454, MK 1) How to remove the exterior door panel on a Smart Forfour? This video explains how to proceed: before starting the disassembly work, let's disconnect
How to replace the door handle cable of the Smart Forfour.
Smart Forfour (2004-2006 / W454, MK 1) Let's briefly go over the instructions for disassembling and replacing the cable of the front door handle of the Smart Forfour. First, we open the fr
How to disassemble and replace the speakers of the Smart Forfour.
Smart Forfour (2014-2021 / W453, MK 2) Today's guide will show us the steps to disassemble and replace the speakers of the Smart Forfour. First, we open the front door and begin to disasse

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos