Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Smart
  4. :
  5. Forfour
  6. : Remove the exterior door panel on a Smart Forfour

Smart Forfour - Video tutorial

Model: Smart Forfour MK 1, W454 - Years 2004-2006
Part: Door panel
Operation: Remove the exterior door panel on a Smart Forfour

How to remove the exterior door panel on a Smart Forfour? This video explains how to proceed: before starting the disassembly work, let's disconnect the battery terminals in the front engine compartment. With a screwdriver we go to unscrew the tightening screws placed in the panel of the interior door, we remove the rubber gasket placed on the door next to the crystal. With the plastic lever we release all the clips of the door panel, leveraging the entire perimeter of the door. Finally, we pull off the skirt with our hands. Let's reassemble all the pieces by proceeding backwards.


Posted on 31 October 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos