Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the front door panel of the Smart Fortwo

Model: Smart Smart 451 - Years 2007-2015
Part: Door trim panel

Following these simple steps, we will see how to disassemble the front door panel of the Smart Fortwo. First, open the front door and start removing the plastic cover of the door handle by levering on the sides; then unscrew the fixing screws found underneath and on the sides of the panel, until it is detached and removed completely (disconnecting the handle cable), as shown in the video. At this point, it will be possible to access the inside of the door, as well as the window mechanism and the lock, finally reassembling the panel!

Posted on 11 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Remove the Smart Fortwo door panel
Remove the Smart Fortwo door panel
Smart (2007-2015 / 451) How to remove the door panel (exterior) on a Smart Fortwo? Before starting the disassembly work, let's disconnect the battery terminals located in th…
How to Remove the Outer Door Panel on a Smart fortwo
How to Remove the Outer Door Panel on a Smart fortwo
Smart (1998-2007 / 450) How to remove the outer door panel on a Smart fortwo? This video explains the procedure. Before starting the disassembly, disconnect the battery conn…
How to disassemble the front speaker of the Smart Fortwo
How to disassemble the front speaker of the Smart Fortwo
Smart (2014-2022 / 453) Let's discover how to disassemble and replace the front speaker of the Smart Fortwo, in simple steps. First, open the front door of the car and start…

How to Remove the Distributor from a Fiat Panda

How to remove the distributor from a Fiat Panda? Lift the bonnet and secure it, then use a screwdriver to unscrew the locking pins of the ventilation pipe, remove the engine soundproofing panel and the cap (detach it). Start by unscrewing the fastening pins of the distributor (as shown in the video); remove the distributor from the engine housing. Install a new distributor inside the engine bay, connect the various cables and close with the cap. Refit all previously removed parts (soundproofing panel, filter, etc.) and test the correct operation.

Watch the video!


by ScegliAuto

More videos