Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight of a Smart

Model: Smart Smart 451 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Headlight

See other generations:
Video tutorial

First, unclip the bonnet from the levers located on both sides of the grille above the bumper. After lifting it, rest it on the designated hooks.

Disconnect the battery terminals to protect any electronic devices. If you are replacing the bulbs in a single headlight, you can remove the cover at the back to access the bulbs in their respective positions.

This way, you can replace the bulbs in each position. Reverse the steps described for reassembly.


Updated on 25 February 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight of the Smart Roadster?
How to Replace the Front Headlight of the Smart Roadster?
Smart (2003-2005 / 452, Roadster) To replace the front headlight of the Smart Roadster, open the bonnet and loosen the bolts securing the front headlight cover, located at the top and…
How to Replace the Headlight Bulb of the Smart Fortwo
How to Replace the Headlight Bulb of the Smart Fortwo
Smart (2014-2022 / 453) In today's tutorial video, learn how to remove and replace the headlight bulb of the Smart Fortwo by following the instructions below. First, remove …
How to replace the front headlight of the Smart Fortwo
How to replace the front headlight of the Smart Fortwo
Smart (2007-2015 / 451) This brief guide will show us how to disassemble and replace the front headlight and its bulbs of the Smart Fortwo. First, we open the front hood of …

Other guides you may be interested in

Replacing the Gear Knob on the Renault Espace

The following steps will show you how to remove and replace the gear knob of the manual gearbox on the Renault Espace. First, get in the vehicle and start by removing the small upper cover of the knob; to remove it, simply pull the gear knob upwards with force to detach it from the lever, as shown in the video. At this point, remove and replace the gear gaiter if necessary, installing the new one; finally, insert the new gear knob, securing it properly onto the lever (ensure there is no play between the lever and the knob).

Watch the video!


by ScegliAuto

More videos