Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. SsangYong
    3. :
  3. Rexton
    4. : Fuse box

SsangYong Rexton - Fuse box

SsangYong Rexton (2001-2017 / MK 1)
Fuse box location of the Ssangyong Rexton.
The Ssangyong Rexton, produced from 2012 to 2016, has a fuse box inside. The fuse box is located inside the cabin, on the left side of the dashboard. To view …read all…
Posted on 10 October 2023 by ScegliAuto
SsangYong Rexton (2001-2017 / MK 1)
Where is the engine compartment fuse box located in the Ssangyong Rexton?
In this video we can see where the engine compartment fuse box is located in the Ssangyong Rexton, useful in case we need to check the status of the fuse of a …read all…
Posted on 19 April 2023 by ScegliAuto
SsangYong Rexton (2001-2017 / MK 1)
Where to find the fuse diagram on Ssangyong Rexton
Let's find out in this short video tutorial today where we can find the fuse box and its diagram on a Ssangyong Rexton, model produced from 2001 to 2017. So to …read all…
Posted on 13 May 2024 by ScegliAuto
Shock absorbers (1) Car stereo (2) Battery (1) Key (3) Timing belt (1) Checks and maintenance (1) Dashboard (1) Bearing (1) Fog lights (1) Air filter (1) Cabin air filter (4) Diesel filter (3) Headlight bulb (4) Rear light bulb (1) Door panel (2) Push button (1) Instrument cluster (1) Fuse box (3) Outside rearview mirror (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos