Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. SsangYong
    3. :
  3. Rexton
    4. : Headlight bulb

SsangYong Rexton - Headlight bulb

SsangYong Rexton (2001-2017 / MK 1)
How to replace the front headlight bulbs in the Ssangyong Rexton?
In this tutorial, we can see how to replace the headlights bulbs in the SsangYong Rexton, a very simple and quick operation. First of all, make sure that the …read all…
Posted on 9 December 2023 by ScegliAuto
SsangYong Rexton (2001-2017 / MK 1)
How do you replace the front headlight bulb of the Ssangyong Rexton?
In order to replace the front headlight bulb of the Ssangyong Rexton, you need to unscrew the screw located inside the wheel arch of the corresponding front …read all…
Posted on 22 August 2023 by ScegliAuto
SsangYong Rexton (2001-2017 / MK 1)
How to change the headlight bulb on the Ssangyong Rexton
If we have to proceed to replace a headlight bulb because it is no longer working on this car we can find the instructions on how to behave in this description …read all…
Posted on 13 November 2022 by ScegliAuto
SsangYong Rexton (2017-2024 / MK 2)
Replacing the front bulb on Ssangyong Rexton
Hello everyone! In this video we will briefly see how to replace the headlight bulb on Ssangyong Rexton. First you need to unscrew the three bolts that secure …read all…
Posted on 29 February 2024 by ScegliAuto
Shock absorbers (1) Car stereo (2) Battery (1) Key (3) Timing belt (1) Checks and maintenance (1) Dashboard (1) Bearing (1) Fog lights (1) Air filter (1) Cabin air filter (4) Diesel filter (3) Headlight bulb (4) Rear light bulb (1) Door panel (2) Push button (1) Instrument cluster (1) Fuse box (3) Outside rearview mirror (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos