Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Bulb on a Ssangyong Rexton

Model: SsangYong Rexton MK 2 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Headlight bulb

See other generations:
Video tutorial

Hello everyone! In this video, we will briefly see how to replace the front headlamp bulb on a Ssangyong Rexton. First, you need to unscrew the three bolts that secure the headlamp to the vehicle.

The three bolts are clearly shown in the video and are located: one at the top facing the centre of the bumper, one lower and also facing the centre, and the last one in the wheel arch. While extracting the headlamp, disconnect the connector.

At this point, you can easily access the bulb from the rear of the lamp as shown in the video. Proceed in reverse for reassembly.


Updated on 23 April 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulb on a Ssangyong Rexton
How to Replace the Front Headlight Bulb on a Ssangyong Rexton
SsangYong Rexton (2001-2017 / MK 1) To replace the front headlight bulb on a Ssangyong Rexton, you need to unscrew the screw located inside the wheel arch corresponding to the headlight…
How to Replace the Front Wheel Bearing of a Ssangyong Rexton?
How to Replace the Front Wheel Bearing of a Ssangyong Rexton?
SsangYong Rexton (2001-2017 / MK 1) Good morning! Today's goal is to replace the front wheel bearing of your Ssangyong Rexton. Start by lifting the vehicle using a suitable ramp/jack. N…
How to Replace the Rear Light Bulb on a SsangYong Rexton
How to Replace the Rear Light Bulb on a SsangYong Rexton
SsangYong Rexton (2001-2017 / MK 1) To replace the rear light bulb on a SsangYong Rexton, open the boot to access the screws securing the rear light in its housing. Once these screws ar…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos