Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Wheel Bearing of a Ssangyong Rexton?

Model: SsangYong Rexton MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Bearing

See other generations:
Video tutorial

Good morning! Today's goal is to replace the front wheel bearing of your Ssangyong Rexton. Start by lifting the vehicle using a suitable ramp/jack.

Next, remove the front wheel by unscrewing the relevant fixing bolts. After that, remove the brake disc from the hub by unscrewing the screws.

This will give you access to the hub bearing, which you simply need to detach from its housing. To install the new bearing, follow this procedure in reverse, and you will have successfully completed the replacement.


Updated on 29 October 2026 by ScegliAuto


Related tutorials

How to Replace the Front Wheel Bearing on a Ssangyong Rexton
How to Replace the Front Wheel Bearing on a Ssangyong Rexton
SsangYong Rexton (2001-2017 / MK 1) This brief and simple guide provides instructions to remove and replace the front wheel bearing on a Ssangyong Rexton. First, lift the vehicle and re…
…
How to Replace the Rear Shock Absorber on the Ssangyong Rexton?
How to Replace the Rear Shock Absorber on the Ssangyong Rexton?
SsangYong Rexton (2001-2017 / MK 1) To replace the rear shock absorber on the Ssangyong Rexton, lift the vehicle with a jack or ramp so that the corresponding wheel is not in contact wi…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos