Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Wheel Bearing on a Ssangyong Rexton

Model: SsangYong Rexton MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Bearing

See other generations:
Video tutorial

This brief and simple guide provides instructions to remove and replace the front wheel bearing on a Ssangyong Rexton. First, lift the vehicle and remove the front wheel; then unscrew the bolts securing the brake caliper, subsequently removing the brake pad carrier, as illustrated in the video.

At this point, unscrew the wheel bearing bolts, also removing the front brake disc; then install the new wheel bearing, as well as the original replacement part, following the video tutorial to the end!


Updated on 7 June 2026 by ScegliAuto


Related tutorials

How to Replace the Front Wheel Bearing of a Ssangyong Rexton?
How to Replace the Front Wheel Bearing of a Ssangyong Rexton?
SsangYong Rexton (2001-2017 / MK 1) Good morning! Today's goal is to replace the front wheel bearing of your Ssangyong Rexton. Start by lifting the vehicle using a suitable ramp/jack. N…
How to Replace the Front Headlight Bulb on a Ssangyong Rexton
How to Replace the Front Headlight Bulb on a Ssangyong Rexton
SsangYong Rexton (2001-2017 / MK 1) To replace the front headlight bulb on a Ssangyong Rexton, you need to unscrew the screw located inside the wheel arch corresponding to the headlight…
How to Replace the Rear Shock Absorber on the Ssangyong Rexton?
How to Replace the Rear Shock Absorber on the Ssangyong Rexton?
SsangYong Rexton (2001-2017 / MK 1) To replace the rear shock absorber on the Ssangyong Rexton, lift the vehicle with a jack or ramp so that the corresponding wheel is not in contact wi…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos