Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Front Headlamp Bulb on a Ssangyong Rexton

Model: SsangYong Rexton MK 1 - Years 2001-2017
Part: Headlight bulb

To replace a non-functioning headlamp bulb on this vehicle, follow the instructions in this description and refer to the video images. After opening the bonnet, remove the support screws of the upper plate of the grille, then unscrew the support screws of the headlamp. This will allow you to remove the headlamp from the body by pulling it towards you. Behind the headlamp unit, there are plastic caps that must be unscrewed, and beneath them, you will find the lamp connector, which you will detach to replace the bulb. Then, reassemble the headlamp by refitting all the screws removed earlier.

Updated on 25 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb on a Ssangyong Rexton
How to Replace the Front Headlight Bulb on a Ssangyong Rexton
SsangYong Rexton (2001-2017 / MK 1) To replace the front headlight bulb on a Ssangyong Rexton, you need to unscrew the screw located inside the wheel arch corresponding to the headlight…
How to Change the Front Fog Light Bulb on the SsangYong Rexton
How to Change the Front Fog Light Bulb on the SsangYong Rexton
SsangYong Rexton (2001-2017 / MK 1) In this brief and simple guide, discover the steps to remove and replace the front fog light bulb on the SsangYong Rexton. First, open the bonnet of …
How to Replace the Rear Light Bulb on a SsangYong Rexton
How to Replace the Rear Light Bulb on a SsangYong Rexton
SsangYong Rexton (2001-2017 / MK 1) To replace the rear light bulb on a SsangYong Rexton, open the boot to access the screws securing the rear light in its housing. Once these screws ar…

Other guides you may be interested in

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos