Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

SsangYong Rexton - Key

SsangYong Rexton (2017-2024 / MK 2)
How to replace the battery of the SsangYong Rexton remote control?
Replacing the battery of the SsangYong Rexton remote control, as we can see in this tutorial, is an extremely simple and fast operation. To do this, we will …read all…
Posted on 8 October 2023 by ScegliAuto
SsangYong Rexton (2017-2024 / MK 2)
How to replace the battery of the SsangYong Rexton remote control?
In this tutorial, we can see how to replace the battery of the Ssangyong Rexton remote control, an extremely simple and quick operation. To do this, we will …read all…
Posted on 15 July 2023 by ScegliAuto
SsangYong Rexton (2001-2017 / MK 1)
How to replace the key battery of a Ssangyong Rexton
Using a small slotted screwdriver and prying, we begin by removing the cover of the screws located near the physical key. By doing so, we will have discovered …read all…
Posted on 8 January 2024 by ScegliAuto
Shock absorbers (1) Car stereo (2) Battery (1) Key (3) Timing belt (1) Checks and maintenance (1) Dashboard (1) Bearing (1) Fog lights (1) Air filter (1) Cabin air filter (4) Diesel filter (3) Headlight bulb (4) Rear light bulb (1) Door panel (2) Push button (1) Instrument cluster (1) Fuse box (3) Outside rearview mirror (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos