Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. SsangYong
    3. :
  3. Rexton
    4. : Diesel filter

SsangYong Rexton - Diesel filter

SsangYong Rexton (2001-2017 / MK 1)
How to replace the diesel filter in the Ssangyong Rexton?
In this tutorial, we can see how to replace the diesel filter in the Ssangyong Rexton, an extremely simple and fast operation. First of all, make sure that the …read all…
Posted on 18 May 2023 by ScegliAuto
SsangYong Rexton (2001-2017 / MK 1)
Removing the SsangYong Rexton RX 270 XDi diesel filter
Today we will see, in this video tutorial, how to disassemble and replace the diesel filter of a SsangYong Rexton RX 270 XDi, in simple steps. First we open …read all…
Posted on 17 February 2024 by ScegliAuto
SsangYong Rexton (2001-2017 / MK 1)
SsangYong Rexton 2.2 Diesel fuel filter replacement
In this video tutorial we will see the main steps on how to disassemble and replace the diesel filter of a SsangYong Rexton 2.2 Diesel. First of all we open …read all…
Posted on 17 February 2024 by ScegliAuto
Shock absorbers (1) Car stereo (2) Battery (1) Key (3) Timing belt (1) Checks and maintenance (1) Dashboard (1) Bearing (1) Fog lights (1) Air filter (1) Cabin air filter (4) Diesel filter (3) Headlight bulb (4) Rear light bulb (1) Door panel (2) Push button (1) Instrument cluster (1) Fuse box (3) Outside rearview mirror (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos