Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Diesel Filter on SsangYong Rexton RX 270 XDi

Model: SsangYong Rexton MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Diesel fuel filter

See other generations:
Video tutorial

Today, in this video tutorial, you will learn how to remove and replace the diesel filter on a SsangYong Rexton RX 270 XDi in simple steps. First, open the bonnet and locate the diesel filter; then disconnect the diesel inlet and outlet pipes and pull off the filter by unscrewing the lower fixing screw and disconnecting the electrical connector located under the filter.

At this point, replace it with a new one of the correct type and insert it into its place, reconnecting the connector; before reconnecting the diesel pipes, check their condition for wear.


Updated on 19 April 2026 by ScegliAuto


Related tutorials

Replacing Cabin Air Filter on Ssangyong Rexton RX 270
Replacing Cabin Air Filter on Ssangyong Rexton RX 270
SsangYong Rexton (2001-2017 / MK 1) In today's video tutorial, you will see how to disassemble and replace the cabin air filter on a Ssangyong Rexton RX 270 xdi. First, locate the filte…
Replacing the Diesel Filter on SsangYong Rexton 2.2 Diesel
Replacing the Diesel Filter on SsangYong Rexton 2.2 Diesel
SsangYong Rexton (2001-2017 / MK 1) In this video tutorial, you will see the main steps to remove and replace the diesel filter on a SsangYong Rexton 2.2 Diesel. First, open and lift th…
How to Replace the Diesel Filter in a Ssangyong Rexton?
How to Replace the Diesel Filter in a Ssangyong Rexton?
SsangYong Rexton (2001-2017 / MK 1) In this tutorial, you will see how to replace the diesel filter in a Ssangyong Rexton, a very simple and quick operation. First, ensure that the engi…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos