Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Cabin Air Filter on Ssangyong Rexton RX 270

Model: SsangYong Rexton MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Cabin air filter

See other generations:
Video tutorial

In today's video tutorial, you will see how to disassemble and replace the cabin air filter on a Ssangyong Rexton RX 270 xdi. First, locate the filter, which is found inside behind the glove compartment; then remove the two plastic clips to take off the glove compartment partition and access the filter box, as shown in the video.

At this point, unscrew the fastening screws of the cover to remove it; then extract the air filter and replace it with the new one of the correct type.

Finally, insert the new one in the correct orientation!


Updated on 9 April 2026 by ScegliAuto


Related tutorials

Removing the Diesel Filter on SsangYong Rexton RX 270 XDi
Removing the Diesel Filter on SsangYong Rexton RX 270 XDi
SsangYong Rexton (2001-2017 / MK 1) Today, in this video tutorial, you will learn how to remove and replace the diesel filter on a SsangYong Rexton RX 270 XDi in simple steps. First, op…
Replacing the Cabin Air Filter of the Ssangyong Rexton
Replacing the Cabin Air Filter of the Ssangyong Rexton
SsangYong Rexton (2017-2026 / MK 2) To ensure airflow within the ventilation system of the Ssangyong Rexton, a filter is provided in the intake circuit that must be replaced periodicall…
How to Replace the Air Filter on a Ssangyong Rexton
How to Replace the Air Filter on a Ssangyong Rexton
SsangYong Rexton (2001-2017 / MK 1) To replace the air filter on a Ssangyong Rexton, open the bonnet to access the components inside the engine bay. Here, on the left side, you will fin…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos