Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Diesel Filter in a Ssangyong Rexton?

Model: SsangYong Rexton MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Diesel fuel filter

See other generations:
Video tutorial

In this tutorial, you will see how to replace the diesel filter in a Ssangyong Rexton, a very simple and quick operation. First, ensure that the engine is sufficiently cool, then open the bonnet and locate the filter, positioned about halfway up just behind the battery.

Once done, disconnect the three upper pipes by unlocking the respective clips, loosen the bolt of the mounting bracket if necessary, and extract the filter from it. At this point, transfer the water presence sensor to the new part and follow the reverse procedure.


Updated on 27 July 2026 by ScegliAuto


Related tutorials

Removing the Diesel Filter on SsangYong Rexton RX 270 XDi
Removing the Diesel Filter on SsangYong Rexton RX 270 XDi
SsangYong Rexton (2001-2017 / MK 1) Today, in this video tutorial, you will learn how to remove and replace the diesel filter on a SsangYong Rexton RX 270 XDi in simple steps. First, op…
Replacing the Diesel Filter on SsangYong Rexton 2.2 Diesel
Replacing the Diesel Filter on SsangYong Rexton 2.2 Diesel
SsangYong Rexton (2001-2017 / MK 1) In this video tutorial, you will see the main steps to remove and replace the diesel filter on a SsangYong Rexton 2.2 Diesel. First, open and lift th…
How to Replace the Air Filter on a Ssangyong Rexton
How to Replace the Air Filter on a Ssangyong Rexton
SsangYong Rexton (2001-2017 / MK 1) To replace the air filter on a Ssangyong Rexton, open the bonnet to access the components inside the engine bay. Here, on the left side, you will fin…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos