Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. SsangYong
    3. :
  3. Rexton
    4. : How to replace the front headlight bulbs in the Ssangyong Rexton?

SsangYong Rexton - Video tutorial

Model: SsangYong Rexton MK 1 - Years 2001-2017
Part: Headlight bulb
Operation: How to replace the front headlight bulbs in the Ssangyong Rexton?

In this tutorial, we can see how to replace the headlights bulbs in the SsangYong Rexton, a very simple and quick operation. First of all, make sure that the key is not inserted, then open the engine hood, locate the two bolts along the inner side of the headlight in question and unscrew them with a 10mm hex key. Next, remove the small door located on the inner front side of the wheel arch, unscrew the additional indicated bolt, and separate the headlight from the body. At this point, we can open the large circular cap, remove the old bulb by unlocking the metal clip, and install the replacement.


Posted on 9 December 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos