Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Centre Console in a Ssangyong Rexton?

Model: SsangYong Rexton MK 2 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Checks and maintenance

See other generations:
Video tutorial

In this tutorial, we will see how to remove the centre console in a Ssangyong Rexton, a very simple and quick operation. First, remove the bottom of both the small glove compartment and the cup holder, then unscrew the 4 screws that are now exposed.

Next, grasp the console from the rear edge, pull it upwards, and unclip the various fastening clips from the base. At this point, disconnect the 4 connectors and fit the replacement part by following the reverse procedure.

If you need to remove the entire tunnel, simply unscrew the last screws located behind the front side panels.


Updated on 28 June 2026 by ScegliAuto


Related tutorials

How to Remove the Centre Console of a Ssangyong Rexton
How to Remove the Centre Console of a Ssangyong Rexton
SsangYong Rexton (2001-2017 / MK 1) To remove the centre console of the dashboard, including the radio, use a plastic lever and start by unclipping the trim located just below the radio…
How to Replace the Car Radio in a SsangYong Rexton?
How to Replace the Car Radio in a SsangYong Rexton?
SsangYong Rexton (2001-2017 / MK 1) In this tutorial, you will see how to replace the car radio in a SsangYong Rexton, a very simple and quick operation. First, ensure that the key is n…
Removing the 4x4 Transfer Button on a Ssangyong Rexton
Removing the 4x4 Transfer Button on a Ssangyong Rexton
SsangYong Rexton (2001-2017 / MK 1) In this video tutorial, you will see how to remove the 4x4 transfer button on a first-generation Ssangyong Rexton, in the 270 CDI version. First, get…

    Frequently Asked Questions

    • Rexton 2001-2017 - What problems could the Ssangyong Rexton present? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos