Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Centre Console of a Ssangyong Rexton

Model: SsangYong Rexton MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Dashboard

See other generations:
Video tutorial

To remove the centre console of the dashboard, including the radio, use a plastic lever and start by unclipping the trim located just below the radio; then proceed to remove the grille located at the centre of the dashboard corresponding to the console to access the screws fixing the frame that covers the console and incorporates the air vents; once the screws are removed, unclip and take off the frame by disconnecting the relevant plugs before finally removing the screws fixing the radio located at each of the four corners.


Updated on 22 February 2026 by ScegliAuto


Related tutorials

How to Remove the Centre Console in a Ssangyong Rexton?
How to Remove the Centre Console in a Ssangyong Rexton?
SsangYong Rexton (2017-2026 / MK 2) In this tutorial, we will see how to remove the centre console in a Ssangyong Rexton, a very simple and quick operation. First, remove the bottom of …
Replacing the Diesel Filter on SsangYong Rexton 2.2 Diesel
Replacing the Diesel Filter on SsangYong Rexton 2.2 Diesel
SsangYong Rexton (2001-2017 / MK 1) In this video tutorial, you will see the main steps to remove and replace the diesel filter on a SsangYong Rexton 2.2 Diesel. First, open and lift th…
How to Replace the Front Wheel Bearing on a Ssangyong Rexton
How to Replace the Front Wheel Bearing on a Ssangyong Rexton
SsangYong Rexton (2001-2017 / MK 1) This brief and simple guide provides instructions to remove and replace the front wheel bearing on a Ssangyong Rexton. First, lift the vehicle and re…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos