Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the 4x4 Transfer Button on a Ssangyong Rexton

Model: SsangYong Rexton MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Push button

See other generations:
Video tutorial

In this video tutorial, you will see how to remove the 4x4 transfer button on a first-generation Ssangyong Rexton, in the 270 CDI version. First, get inside the vehicle and start by removing the central dashboard trim by prying at the sides; then unscrew the fixing screws located above the stereo, as shown in the video.

At this point, disconnect the transfer button by unplugging the electrical connector at the back; simply replace it and reassemble everything!


Updated on 24 April 2026 by ScegliAuto


Related tutorials

Removing the Door Panel from a SSangyong Rexton
Removing the Door Panel from a SSangyong Rexton
SsangYong Rexton (2001-2017 / MK 1) In this video, learn how to remove the door panel from a SSangyong Rexton. Before starting the removal work, disconnect the battery terminals located…
Removing the Exterior Mirror on Ssangyong Rexton
Removing the Exterior Mirror on Ssangyong Rexton
SsangYong Rexton (2017-2026 / MK 2) As with many other car models, replacing the mirror on the Ssangyong Rexton is straightforward. For protection, you may start by placing masking tape…
Guide to Adjusting the Timing Chain of the Ssangyong Rexton
Guide to Adjusting the Timing Chain of the Ssangyong Rexton
SsangYong Rexton (2001-2017 / MK 1) Today, we will explore the main steps for adjusting the timing chain of the Ssangyong Rexton, following the instructions provided below. To access th…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos