Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. SsangYong
    3. :
  3. Rexton
    4. : Removing the door panel of a SSangyong Rexton

SsangYong Rexton - Video tutorial

Model: SsangYong Rexton MK 1 - Years 2001-2017
Part: Door panel
Operation: Removing the door panel of a SSangyong Rexton

Let's see in this video how to remove the door panel of a SSangyong Rexton. Before starting the disassembly work, let's disconnect the battery terminals in the engine compartment. Let's start the disassembly: with a lever remove the plastic coating of the handle, with a screwdriver we go to unscrew the internal door handle, we unscrew the screws placed in it. Once all the screws have been removed, with the lever we remove all the plastic clips that block the door. We detach the door panel with our hands, unhook the lock opening cable and any power supply terminals. We disassemble the speaker of the car radio.


Posted on 13 October 2023 by ScegliAuto



Removing the exterior mirror on Ssangyong Rexton
SsangYong Rexton (2017-2024 / MK 2) As with many other car models, replacing the mirror is child's play on Ssangyong Rexton. For protection, you could start by putting paper tape around
Where to find the fuse diagram on Ssangyong Rexton
SsangYong Rexton (2001-2017 / MK 1) Let's find out in this short video tutorial today where we can find the fuse box and its diagram on a Ssangyong Rexton, model produced from 2001 to 2
How to replace the battery of the SsangYong Rexton remote control?
SsangYong Rexton (2017-2024 / MK 2) Replacing the battery of the SsangYong Rexton remote control, as we can see in this tutorial, is an extremely simple and fast operation. To do this,

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos