Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. SsangYong
  4. :
  5. Actyon
  6. : Disassembly of the front speakers on the Ssangyong Actyon

SsangYong Actyon - Video tutorial

Model: SsangYong Actyon MK 1 - Years 2006-2018
Part: Loudspeaker
Operation: Disassembly of the front speakers on the Ssangyong Actyon

In today's video we will see how to disassemble and replace the front speakers or speakers on the Ssangyong Actyon, following these simple steps. First we open the front door and start by unscrewing the fixing screws that we find on the door panel, using a Phillips screwdriver; then we lever the sides to disassemble and remove the panel, as shown in the video. At this point we disconnect the handle cable and the electrical connector of the push-button panel; we just have to unscrew the speaker screws and disconnect the electrical connector to remove them!


Posted on 8 March 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos