Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door Panel on a Ssangyong Rexton

Model: SsangYong Rexton MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Door trim panel

See other generations:
Video tutorial

Is the door panel on a Ssangyong Rexton in need of replacement? Here’s how to do it. Disconnect the battery terminals located in the engine bay. Using a screwdriver, unscrew the screws located in the space of the upper door opening lever and the screws present in the handle.

Remove the plastic cover of the mirror (inner side), unscrew the remaining screws on the door panel, and detach the retaining clips.

Pull the panel away with your hands and disconnect it from the door (unplug the wiring for the power and the opening cable). Carry out the desired maintenance inside the door or install the new panel.


Updated on 17 March 2026 by ScegliAuto


Related tutorials

Removing the Door Panel from a SSangyong Rexton
Removing the Door Panel from a SSangyong Rexton
SsangYong Rexton (2001-2017 / MK 1) In this video, learn how to remove the door panel from a SSangyong Rexton. Before starting the removal work, disconnect the battery terminals located…
Removing the Exterior Mirror on Ssangyong Rexton
Removing the Exterior Mirror on Ssangyong Rexton
SsangYong Rexton (2017-2026 / MK 2) As with many other car models, replacing the mirror on the Ssangyong Rexton is straightforward. For protection, you may start by placing masking tape…
How to reset the tyre pressure light on the Ssangyong Rexton?
How to reset the tyre pressure light on the Ssangyong Rexton?
SsangYong Rexton (2017-2026 / MK 2) To clear the tyre pressure light on the Ssangyong Rexton, inflate the tyres to the optimal pressure value, which is indicated on the sticker affixed …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos