Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. SsangYong
    3. :
  3. Rodius
    4. : Headlight bulb replacement

SsangYong Rodius - Video tutorial

Model: SsangYong Rodius MK 1 - Years 2004-2017
Part: Headlight bulb
Operation: Headlight bulb replacement

In order to replace the headlight bulb it is necessary to remove the headlight itself by unscrewing the three fixing pins (two upper and one lower) and disconnecting the relative sockets since there is not enough room for maneuver: once bench the headlight is very easy to access the lamp holders and replace the bulbs. It is advisable to choose good quality light bulbs avoiding low cost aftermarket products that promise excellent durability but which are very easily damaged by forcing you to repeat the whole operation: the benefits of a good quality light bulb can be seen over time.


Posted on 16 July 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos