Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the battery of the Subaru Impreza key.

Model: Subaru Impreza MK 5 - Years 2016-2023
Part: Key

To change the battery inside the key of your Subaru Impreza, all you need to do is follow the steps described in our new guide. First of all, hold down the button located on the back cover and at the same time slide out the emergency key by pulling it upwards. Once the emergency key is removed, open the cover and locate the dead battery inside. Then, remove the old battery and replace it with a new CR2032 3V battery. Finally, reassemble the entire cover and insert the emergency key back inside.

Posted on 27 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Battery of the Subaru Impreza WRX
How to Replace the Key Battery of the Subaru Impreza WRX
Subaru Impreza (2016-2023 / MK 5) To replace the battery inside your Subaru Impreza WRX key, follow the procedure outlined in this guide. Before starting, ensure you have a small flat…
How to Replace the Key Battery on a 2019 Subaru Impreza
How to Replace the Key Battery on a 2019 Subaru Impreza
Subaru Impreza (2016-2023 / MK 5) If the smart key for your 2019 Subaru Impreza has suddenly stopped working due to a completely flat battery, do not worry as we will discover togethe…
Where is the fuse box of the Subaru Impreza located?
Where is the fuse box of the Subaru Impreza located?
Subaru Impreza (2016-2023 / MK 5) In this new guide, we will help you easily locate the fuse box inside the cabin of your Subaru Impreza. First of all, enter the car and reach the dri…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos