Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Window Regulator Motor in the Subaru Outback?

Model: Subaru Outback BR, BM, MK 4 - Years: 2009, 2010, 2011, 2012, 2013, 2014
Part: Power window motor

See other generations:
Video tutorial

In this tutorial, learn how to replace the window regulator motor in the Subaru Outback, a straightforward operation. First, open the door you will be working on, then unclip both indicated caps and the internal cover of the mirror, unscrew the released screws, and separate the panel from the door.

Next, remove the protective cover, unscrew the two bolts securing the glass, and tape the glass to the upper pillar. At this point, simply remove the motor, insert the replacement, and reassemble everything by following the reverse procedure.


Posted on 9 September 2026 by ScegliAuto


Related tutorials

Remove the Front Door Panel on the Subaru Outback MK3
Remove the Front Door Panel on the Subaru Outback MK3
Subaru Outback (2003-2009 / BL, BP, MK 3) In today's tutorial video, you will learn how to remove the front door panel on the third generation Subaru Outback by following these simple steps. …
How to Locate Fuses and Understand Diagrams in a Subaru Outback
How to Locate Fuses and Understand Diagrams in a Subaru Outback
Subaru Outback (2009-2014 / BR, BM, MK 4) The first fuse panel in a Subaru Outback can be found inside the vehicle, located behind the dashboard on the lower left side of the steering wheel, …
How to Reset the Tyre Pressure Warning Light on a Subaru Outback
How to Reset the Tyre Pressure Warning Light on a Subaru Outback
Subaru Outback (2009-2014 / BR, BM, MK 4) Before you begin, exit the cabin of your Subaru Outback. Start by checking and inflating the car's tyres until they all reach the correct pressure. N…

How to Set the Time in an Audi A4?

In this tutorial, you will see how to set the time in an Audi A4, a very simple and quick operation to perform after replacing the battery or when the time changes. First, insert the key and turn on the instrument cluster. Then, press the "SETUP" button located on the center console. Next, press the upper left arrow button, navigate to the "Time" option, and use the central knob to adjust the clock. Finally, set any necessary formats and save by returning to the main screen.

Watch the video!


by ScegliAuto

More videos