|
Do it yourself
| |||
| ||||
Replacing the Brake Light Bulb on a 2005 Subaru Outback LLB
Model: Subaru Outback
BP, BL, MK 3
- Years:
2003, 2004, 2005, 2006, 2007, 2008, 2009
Video tutorial
The video shows how to replace the brake light bulb on a 2005 Subaru Outback LLB. It is a very simple operation that can be done without going to a mechanic and takes only a few minutes. The brake lights are a significant safety feature of the vehicle and should be checked regularly. First, open the bonnet. Next, using a cross screwdriver, unscrew the screws and remove them. Pry the black piece to extract it. Unscrew the two Phillips head screws. At this point, pull out the entire light unit. Remove the blown bulb, connected to the electrical cable, from the socket and unscrew it. Replace it and then carry out all the assembly steps.
Updated on 5 May 2026 by ScegliAuto
Related tutorials
Subaru Outback
(2009-2014 /
MK 4, BM, BR)
Replacing the front headlight bulbs in a Subaru Outback is very simple. Follow this tutorial to proceed. The video shows the operation with the headl…
Subaru Outback
(2003-2009 /
BP, BL, MK 3)
Let’s see how to replace the blown bulbs in the front compartment of the Subaru Outback. Open the front bonnet by pulling the lever located in the ve…
Subaru Outback
(2009-2014 /
MK 4, BM, BR)
Today, we will look at the main instructions to remove and replace the front headlight bulb on the Subaru Outback. To access the dipped beam bulb, it…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
Resetting the Tyre Pressure Monitoring System (TPMS) Light on the Toyota Yaris
These brief and simple steps will show you how to reset the tyre pressure monitoring system (TPMS) light on the Toyota Yaris. Before resetting the light, ensure that all four tyres are at the correct operating pressure. Get inside the vehicle on the driver's side and locate the TPMS reset button found at the bottom left of the dashboard (next to the steering wheel); press and hold it until the TPMS light on the instrument cluster resets, following the video until the end! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.019
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |