Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Logos on the Subaru Crosstrek (XV)

Model: Subaru Xv MK 1 - Years 2012-2017
Part: Manufacturer emblem

In this video, you will learn how to change the logos on the Subaru Crosstrek (the Subaru XV in Europe) without removing the metal sticker from the parts in question. We recommend purchasing stickers to apply directly over the original logos, allowing you to easily and quickly restore the originals if desired. The first step is to thoroughly clean the original logos of any dirt residue. You can now attach your stickers, ensuring they adhere well using a spatula if needed, to avoid air bubbles.

Updated on 29 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the headlight bulb in the Subaru Crosstrek XV?
How to replace the headlight bulb in the Subaru Crosstrek XV?
Subaru Xv (2012-2017 / MK 1) To replace the bulb in the Subaru Crosstrek XV, open the bonnet to access the engine compartment. At this point, remove the connector attached to the…
How to Replace the Remote Battery of the Subaru XV Crosstrek?
How to Replace the Remote Battery of the Subaru XV Crosstrek?
Subaru Xv (2012-2017 / MK 1) Replacing the battery of the Subaru XV Crosstrek remote is a very simple and quick task. You will need a small flathead screwdriver and a replacement…
How to replace the front fog light bulb of the Subaru XV
How to replace the front fog light bulb of the Subaru XV
Subaru Xv (2012-2017 / MK 1) Below we will see the main instructions useful for disassembling and replacing the front fog light bulb of the Subaru XV, Crosstrek version. First of…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos