Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the door panel of the Subaru Forester 4

Model: Subaru Forester MK 4, SJ - Years 2012-2019
Part: Door trim panel

Today we will see, in this simple guide, how to remove the front door panel of the fourth generation Subaru Forester. First we open the front door and start by unscrewing the plastic screws that we find on the panel, or under the various caps and lids; then we use thin levers to release our door panel from the sides, as shown in the video. At this point we are going to disconnect the electric connector of the push-button panel and the cable of the handle; then remove the panel, applying the reverse procedure for reassembly!

Posted on 21 July 2022 by ScegliAuto

Video tutorial

Related tutorials

Removal of the rear door panel of the Subaru Forester
Removal of the rear door panel of the Subaru Forester
Subaru Forester (2012-2019 / MK 4, SJ) Let's see in this guide the procedure necessary to remove and replace the rear door panel of the Subaru Forester. First we open the rear door and sta…
How to remove the exterior door handle of the Subaru Forester
How to remove the exterior door handle of the Subaru Forester
Subaru Forester (2002-2008 / SG, MK 2) Let's see in this guide the steps that will allow us to remove and replace the exterior door handle of the Subaru Forester, following the instruction…
How to disassemble the door panel of the Subaru Forester
How to disassemble the door panel of the Subaru Forester
Subaru Forester (2012-2019 / MK 4, SJ) Today we will see the main instructions on how to disassemble and remove the front door panel of the Subaru Forester. First, we open the front door o…

How to Remove the Engine Air Filter on a Fiat 500X

To remove the engine air filter on a Fiat 500X: open the car door, pull up the lever to open the engine bay located at the bottom left of the dashboard and lift the front bonnet, securing it with the prop rod. Unscrew the retaining bolts of the air intake kit (located above the engine head), remove the cover of the filter box and extract the worn air filter. Insert a new filter into the designated housing (ensuring it fits snugly against the walls). Finally, reassemble the air box cover and tighten everything with the bolts. Close the front bonnet after maintenance.

Watch the video!


by ScegliAuto

More videos