Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Subaru
    3. :
  3. Outback
    4. : Subaru Outback 3.6L serpentine belt replacement

Subaru Outback - Video tutorial

Model: Subaru Outback BR, MK 4, BM - Years 2009-2014
Part: V-belt
Operation: Subaru Outback 3.6L serpentine belt replacement

In today's video tutorial we will see the steps that will allow us to disassemble and replace the serpentine belt of the Subaru Outback, with 3.6-liter engine. First we open the engine hood and start by disassembling and removing the upper plastic cover; after which we use a 14 mm wrench to loosen the belt tensioner, as shown in the video. Now remove the old V-belt and replace it with the new one, with the original spare; let's insert it correctly between the various pulleys, turning the engine with the key to make sure we have inserted it perfectly!


Posted on 17 October 2022 by ScegliAuto



How to replace the alternator belt in the Subaru Outback?
Subaru Outback (1999-2003 / BE, BH, MK 2) In this tutorial we can see how to replace the alternator belt in the Subaru Outback, a rather simple and quick operation if you have a good dexterit
How to replace the remote control battery of the Subaru Outback?
Subaru Outback (2014-2019 / BS, MK 5) Replacing the remote control battery of the Subaru Outback is an extremely simple and economical operation, let's see how to proceed in this tutorial
How to remove the rear seats of the Subaru Outback.
Subaru Outback (2003-2009 / BP, BL, MK 3) Below we will see the guide that will allow us to disassemble the rear seats of the Subaru Outback, in simple and quick steps. First, we open the rea

How to reset the oil change light on Kymco Agility 125

If we have done the oil change on this type of scooter in do-it-yourself mode, we need to complete the job by resetting the oil change light that came on in the instrument panel display. In the description below we can find the necessary steps to do this. First you need to insert the key on the ignition switch and turn on the ignition. Then show the total mileage on the display and then press the two buttons at the bottom of the panel at the same time until the oil change light goes off.

Watch the video!


by ScegliAuto

More videos