Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Alternator Belt in the Subaru Outback?

Model: Subaru Outback MK 2, BH, BE - Years 1999-2003
Part: V-belt

In this tutorial, you will see how to replace the alternator belt in the Subaru Outback, a relatively simple and quick task if you have good manual skills. First, wait for the engine to be completely cold, then open the bonnet and remove the belt cover using both a 10mm and a 12mm socket. Next, loosen the tensioner bolt just enough to reduce the tension, then unclip the belt from the pulleys and insert the replacement. Finally, reassemble everything by following the reverse procedure.

Updated on 22 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Serpentine Belt on the Subaru Outback 3.6L
Replacing the Serpentine Belt on the Subaru Outback 3.6L
Subaru Outback (2009-2014 / MK 4, BM, BR) In today's video tutorial, you will see the steps to remove and replace the serpentine belt on the Subaru Outback with a 3.6-litre engine. First, ope…
How to Reset the Tyre Pressure Warning Light on a Subaru Outback
How to Reset the Tyre Pressure Warning Light on a Subaru Outback
Subaru Outback (2009-2014 / MK 4, BM, BR) Before you begin, exit the cabin of your Subaru Outback. Start by checking and inflating the car's tyres until they all reach the correct pressure. N…
How to Change the Time on a Subaru Outback?
How to Change the Time on a Subaru Outback?
Subaru Outback (2014-2019 / BS, MK 5) Good morning, today’s goal is to modify the time on the onboard computer of your Subaru Outback. Start by sitting in the driver’s seat of the vehicle…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos