Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin air filter of the Subaru Impreza 4.

Model: Subaru Impreza MK 4 - Years 2011-2016
Part: Cabin air filter

In the following guide dedicated to your Subaru Impreza Mk4 (years 2012-2016), we will discover the steps to follow if you want to replace the cabin air filter on your own. First of all, you need to enter the cabin and reach the passenger seat. Then, locate the glove compartment in front of you and open it. At this point, remove the safety hook located on the right side and take out the entire glove compartment. Finally, locate the box that contains the cabin air filter and replace it after removing the protective cover of the box.

Posted on 14 July 2023 by ScegliAuto

Video tutorial

Related tutorials

Remove Subaru Impreza engine filter
Remove Subaru Impreza engine filter
Subaru Impreza (2011-2016 / MK 4) How do you remove the engine air filter on a Subaru Impreza? Let's see how to do it after opening the engine compartment. Once the front hood is lift…
How to replace the air filter on Subaru Impreza
How to replace the air filter on Subaru Impreza
Subaru Impreza (2016-2023 / MK 5) Replacing the air filter on your 2017 Subaru Impreza is an operation perfectly feasible by anyone even in total autonomy. Furthermore, thanks to the …
How to change the climate filter on Subaru Impreza
How to change the climate filter on Subaru Impreza
Subaru Impreza (2011-2016 / MK 4) How do I change the Subaru pollen filter? Let's see the disassembly of the glovebox parts to remove the air filter. We detach the guides on the sides…

Other guides you may be interested in

How to Replace the Front Headlamp Bulb on a Fiat Grande Punto

To replace the front headlamp bulb on a Fiat Grande Punto, first open the bonnet. Once done, access the rear of the headlamp where the bulb needs replacing (the bulb is of type H4). Locate the rubber cover that protects the electrical contacts and bulbs from water and moisture. Remove it by pulling on the tab. Now, pull the connector for the bulb's power supply and disconnect it from its position. At this point, push down on the top of the spring that holds the bulb in place, and you can extract the bulb from its housing. To fit the new bulb, follow the steps in reverse as shown in the images. The video also shows how to remove the position bulb, which is located just below the H4. After disconnecting the power supply, you can extract it along with the bulb holder by pressing the two tabs to release it and pulling. The bulb can then be removed from its position in the bulb holder.

Watch the video!


by ScegliAuto

More videos