Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Seats from the Subaru Outback

Model: Subaru Outback BL, BP, MK 3 - Years 2003-2009
Part: Seat

This guide will help you dismantle the rear seats of the Subaru Outback in simple and quick steps. First, open the rear doors and start to unclip and remove the seat base from the bottom, lifting it out of the cabin; to remove the backrests, you will need to undo the securing screws found at their base, removing the seatbelt attachments if necessary. At this point, clean or replace the rear seats, applying the reverse procedure for reassembly!

Updated on 31 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Seats from the Subaru Outback
How to Remove the Rear Seats from the Subaru Outback
Subaru Outback (2014-2019 / BS, MK 5) Below are the instructions that will allow you to remove and replace the rear seats of the Subaru Outback. First, open the rear doors of the vehicle …
How to Remove the Rear Seats of the Subaru Outback
How to Remove the Rear Seats of the Subaru Outback
Subaru Outback (2020-2025 / MK 6, BT) This guide provides brief instructions on how to remove the rear seats of the Subaru Outback. First, open the rear doors and lift the bench seat to u…
How to Remove the Rear Seats from the Subaru Outback 4
How to Remove the Rear Seats from the Subaru Outback 4
Subaru Outback (2009-2014 / MK 4, BM, BR) In this video, see how to remove the bench and rear seats from the 2011 Subaru Outback, fourth generation. First, open the rear doors and start by re…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos