Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Seats from the Subaru Outback 4

Model: Subaru Outback BR, BM, MK 4 - Years: 2009, 2010, 2011, 2012, 2013, 2014
Part: Seat

See other generations:
Video tutorial

In this video, see how to remove the bench and rear seats from the 2011 Subaru Outback, fourth generation. First, open the rear doors and start by removing the bench; lift it upwards to unclip it, as shown in the video.

Next, open the tailgate and recline the seatbacks; then move the carpet to access the fixing screws for the seatbacks, which are located at the base. Simply unscrew all the screws to completely remove the seatbacks, applying the reverse procedure for reassembly!


Updated on 2 June 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Seats of the Subaru Outback
How to Remove the Rear Seats of the Subaru Outback
Subaru Outback (2020-2025 / MK 6, BT) This guide provides brief instructions on how to remove the rear seats of the Subaru Outback. First, open the rear doors and lift the bench seat to u…
How to Remove the Rear Seats from the Subaru Outback
How to Remove the Rear Seats from the Subaru Outback
Subaru Outback (2003-2009 / BL, BP, MK 3) This guide will help you dismantle the rear seats of the Subaru Outback in simple and quick steps. First, open the rear doors and start to unclip and…
How to Remove the Rear Seats from the Subaru Outback
How to Remove the Rear Seats from the Subaru Outback
Subaru Outback (2014-2019 / BS, MK 5) Below are the instructions that will allow you to remove and replace the rear seats of the Subaru Outback. First, open the rear doors of the vehicle …

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos