Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Seats from the Subaru Outback

Model: Subaru Outback BS, MK 5 - Years 2014-2019
Part: Seat

Below are the instructions that will allow you to remove and replace the rear seats of the Subaru Outback. First, open the rear doors of the vehicle and start pulling and lifting the rear bench seat to remove it from the cabin; then, also remove the seat backs by unscrewing all the fastening screws found at the base, as shown in the video. Tilting only the seat backs allows you to significantly increase the load space in the boot; then refit the seats by applying the reverse procedure!

Updated on 25 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Seats of the Subaru Outback
How to Remove the Rear Seats of the Subaru Outback
Subaru Outback (2020-2025 / MK 6, BT) This guide provides brief instructions on how to remove the rear seats of the Subaru Outback. First, open the rear doors and lift the bench seat to u…
How to Remove the Rear Seats from the Subaru Outback
How to Remove the Rear Seats from the Subaru Outback
Subaru Outback (2003-2009 / BL, BP, MK 3) This guide will help you dismantle the rear seats of the Subaru Outback in simple and quick steps. First, open the rear doors and start to unclip and…
How to Remove the Rear Seats from the Subaru Outback 4
How to Remove the Rear Seats from the Subaru Outback 4
Subaru Outback (2009-2014 / MK 4, BM, BR) In this video, see how to remove the bench and rear seats from the 2011 Subaru Outback, fourth generation. First, open the rear doors and start by re…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos