Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Engine Air Filter on a Subaru Impreza

Model: Subaru Impreza MK 4 - Years: 2011, 2012, 2013, 2014, 2015, 2016
Part: Air filter

See other generations:
Video tutorial

How do you remove the engine air filter on a Subaru Impreza? Let's see how to do it after opening the engine bay. Once the front bonnet is lifted, locate the container that holds the air filter. Release the metal clips around the filter container.

Remove the lid of the container and take out the worn air filter. Insert a new filter into the designated housing, ensuring it fits snugly against the walls.

Finally, refit the lid of the air box and tighten the clips over the cover. Replace the original filter with the exact same original filter.


Updated on 3 May 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter on a Subaru Impreza 4
How to Replace the Cabin Air Filter on a Subaru Impreza 4
Subaru Impreza (2011-2016 / MK 4) In this guide for your Subaru Impreza Mk4 (2012-2016), you will learn the steps to independently replace the cabin air filter. First, enter the cabin…
How to Replace the Rear Light Bulb on a Subaru Impreza
How to Replace the Rear Light Bulb on a Subaru Impreza
Subaru Impreza (2007-2011 / MK 3) Before you start, open the rear hatch of your Subaru Impreza. Begin by prising up and moving the carpet near the rear light. Next, rotate the base of…
How to Replace the Air Filter of the Subaru Impreza
How to Replace the Air Filter of the Subaru Impreza
Subaru Impreza (2016-2023 / MK 5) Replacing the air filter on your 2017 Subaru Impreza is a task that anyone can carry out independently. With the following mini guide, you will be ab…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos