Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Cabin Filter on a Subaru Impreza

Model: Subaru Impreza MK 4 - Years 2011-2016
Part: Cabin air filter

How do you change the cabin filter on a Subaru? Start by removing the side guides of the glove compartment (right side in the dashboard). Remove the glove compartment from the plastic housing to access the air filter. Disconnect the cover from above the filter housing (push the plastic clip), then extract the cabin filter to be replaced. Insert a new pollen filter, ensuring it fits snugly around the walls of the box. Refit the air filter cover and then the glove compartment.

Updated on 6 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Engine Air Filter on a Subaru Impreza
Removing the Engine Air Filter on a Subaru Impreza
Subaru Impreza (2011-2016 / MK 4) How do you remove the engine air filter on a Subaru Impreza? Let's see how to do it after opening the engine bay. Once the front bonnet is lifted, lo…
Where is the fuse box of the Subaru Impreza located?
Where is the fuse box of the Subaru Impreza located?
Subaru Impreza (2016-2023 / MK 5) In this new guide, we will help you easily locate the fuse box inside the cabin of your Subaru Impreza. First of all, enter the car and reach the dri…
How to Replace the Air Filter of the Subaru Impreza
How to Replace the Air Filter of the Subaru Impreza
Subaru Impreza (2016-2023 / MK 5) Replacing the air filter on your 2017 Subaru Impreza is a task that anyone can carry out independently. With the following mini guide, you will be ab…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos