Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the motor oil in the Suzuki GSX-R 600?

Model: Suzuki Gsx R 600
Part: Engine oil

Video tutorial

In this tutorial we can see how to replace the motor oil in the Suzuki GSX-R 600, an extremely simple and fast operation. First of all, make sure that the engine is cool enough, then remove the lower side fairings and place a container under the bike.

Next, locate the drainage hole bolt, unscrew it using a 17mm socket wrench and let all the oil in the system drain out. At this point, all that's left to do is to unscrew the old filter, tighten both the replacement and the bolt, and pour in the new oil through the appropriate hole.


Posted on 18 April 2025 by ScegliAuto


Related tutorials

How to replace the engine oil in the Suzuki GSX-R 600?
How to replace the engine oil in the Suzuki GSX-R 600?
Gsx R 600 .. In this tutorial we can see how to replace the motor oil in the Suzuki GSX-R 600, an extremely simple and fast operation. First of.. …
How to change the engine oil in the Suzuki GSX-R 600?
How to change the engine oil in the Suzuki GSX-R 600?
Gsx R 600 .. how to change the engine oil in the Suzuki GSX-R 600, a very simple and quick operation. First, ensure that the engine is cool enough, then position.. …
How to Replace Engine Oil in a Suzuki GSX-R 600
How to Replace Engine Oil in a Suzuki GSX-R 600
Gsx R 600 .. how to replace the engine oil in a Suzuki GSX-R 600, a very simple and quick operation. First, ensure that the engine is cool enough to work safely,.. …

How to Replace the Belt and Rollers on the Piaggio Vespa GTS 300

This guide briefly outlines the steps to remove and replace the belt and rollers of the variator on the Piaggio Vespa GTS 300 scooter, following the instructions below. First, place your scooter on the centre stand and begin unscrewing the screws of the transmission cover to remove it; then unscrew the nut of the fan and that of the clutch bell, as shown in the video. At this point, remove the belt and then the variator, replacing the rollers found inside; install the new belt and reassemble the transmission!

Watch the video!


by ScegliAuto

More videos