Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the exhaust on the Suzuki Burgman 400 scooter?

Model: Suzuki Burgman 400
Part: Exhaust muffler

Video tutorial

In this tutorial we can see how to replace the exhaust on the Suzuki Burgman 400 scooter, a very simple and quick operation. First of all, make sure that the engine is completely cold, then securely position the scooter on a stand and remove the lower right fairing.

Next, unscrew the lambda sensor using a 22mm wrench, loosen the metal clamp by unscrewing the corresponding bolt with a 12mm wrench, and unscrew the fixing bolt of the terminal. At this point, all that's left to do is remove the old exhaust and install the replacement, following the reverse procedure.


Posted on 11 September 2025 by ScegliAuto


Related tutorials

Replacing the Engine Oil on a Suzuki Burgman 400
Replacing the Engine Oil on a Suzuki Burgman 400
Burgman 400 Perform the engine oil replacement along with the filter on a Suzuki Burgman 400. Follow these steps for scooter maintenance. Position the scooter on…
How do you replace the exhaust pipe of the Suzuki Burgman 400?
How do you replace the exhaust pipe of the Suzuki Burgman 400?
Burgman 400 It will be possible to replace the exhaust of the Suzuki Burgman 400 by loosening the screws that secure the terminal to its housing, near the rear w…
How to Replace the Rear Indicators on a Suzuki Burgman 400 Scooter
How to Replace the Rear Indicators on a Suzuki Burgman 400 Scooter
Burgman 400 This tutorial explains how to replace the rear indicators on a Suzuki Burgman 400 scooter, a very simple and quick operation. First, ensure the key i…

How to Replace the Belt and Rollers on the Piaggio Vespa GTS 300

This guide briefly outlines the steps to remove and replace the belt and rollers of the variator on the Piaggio Vespa GTS 300 scooter, following the instructions below. First, place your scooter on the centre stand and begin unscrewing the screws of the transmission cover to remove it; then unscrew the nut of the fan and that of the clutch bell, as shown in the video. At this point, remove the belt and then the variator, replacing the rollers found inside; install the new belt and reassemble the transmission!

Watch the video!


by ScegliAuto

More videos