Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To make the Service light disappear from the instrument panel of the Suzuki Burgman 125, you will need to insert the ignition key into the ignition switch to turn on the display. Once the instrument panel is turned on, you can press and hold the SEL and ADJ buttons on the sides of the panel simultaneously. After waiting a few seconds with both buttons pressed, you will notice that the Service light has completely disappeared from the instrument panel. You can finish the operation by turning off the panel by turning the key in the opposite direction.

Posted on 25 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the oil change (service) indicator on the Suzuki Burgman 125
How to reset the oil change (service) indicator on the Suzuki Burgman 125
Burgman 125 These short and simple steps will show us how to reset the engine oil change (service) light on the Suzuki Burgman 125. First, put the scooter on the…
How to Reset the Oil Service on the Suzuki Burgman 125 Scooter?
How to Reset the Oil Service on the Suzuki Burgman 125 Scooter?
Burgman 125 Resetting the oil service on the Suzuki Burgman 125 scooter is an extremely simple and quick operation; let's see how to proceed in this tutorial. Be…
How to reset the service on the Suzuki Burgman 125 scooter?
How to reset the service on the Suzuki Burgman 125 scooter?
Burgman 125 In this tutorial, we can see how to reset the service on the Suzuki Burgman 125 scooter, an extremely simple and quick operation, to be carried out o…

How to Replace the Battery in a Yamaha FZ6?

Replacing the battery in the Yamaha FZ6, as shown in this tutorial, is a very simple and quick operation. First, ensure that the key is not inserted, then remove the rider's seat and, using a 10mm socket spanner, loosen the bolt on the tank hinge. Next, unscrew both the front bolts and the fairing mounting bolts, lift the entire tank, and disconnect both terminals starting with the negative. At this point, you can remove the upper plastic plate, take the battery out of its housing, and fit the replacement.

Watch the video!


by ScegliAuto

More videos