Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the engine oil in the Suzuki Burgman 400 scooter?

Model: Suzuki Burgman 400
Part: Engine oil

Video tutorial

In this tutorial we can see how to replace the engine oil in the Suzuki Burgman 400 scooter, an extremely simple and fast operation. First of all, make sure that the engine is cold enough, then place a container under the scooter, locate the drain hole bolt and unscrew it using a 17mm socket wrench.

Wait for all the oil in the system to drain out, open the filter cap by unscrewing the bolts with an 8mm wrench and insert the replacement. At this point, all that remains is to reassemble everything and add the necessary amount of oil through the appropriate hole.


Posted on 22 October 2025 by ScegliAuto


Related tutorials

How to Change the Engine Oil on a Suzuki Burgman 400 Scooter?
How to Change the Engine Oil on a Suzuki Burgman 400 Scooter?
Burgman 400 This tutorial shows how to change the engine oil on a Suzuki Burgman 400 scooter, a very simple and quick operation. First, wait until the engine is …
How to replace the motor oil in the Suzuki Burgman 400 scooter?
How to replace the motor oil in the Suzuki Burgman 400 scooter?
Burgman 400 Replacing the motor oil in the Suzuki Burgman 400 scooter, as we can see in this tutorial, is an extremely simple and fast operation. First of all, m…
How to Change the Engine Oil in the Suzuki Burgman 400 Scooter?
How to Change the Engine Oil in the Suzuki Burgman 400 Scooter?
Burgman 400 Changing the engine oil in the Suzuki Burgman 400 scooter, as shown in this tutorial, is an extremely simple and quick operation. First, wait for the…

How to Replace the Belt and Rollers on the Piaggio Vespa GTS 300

This guide briefly outlines the steps to remove and replace the belt and rollers of the variator on the Piaggio Vespa GTS 300 scooter, following the instructions below. First, place your scooter on the centre stand and begin unscrewing the screws of the transmission cover to remove it; then unscrew the nut of the fan and that of the clutch bell, as shown in the video. At this point, remove the belt and then the variator, replacing the rollers found inside; install the new belt and reassemble the transmission!

Watch the video!


by ScegliAuto

More videos