Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the transmission of the Suzuki Burgman 400, you need to loosen the screws that secure the transmission cover located near the rear wheel, on its left side. Once the cover is freed from its housing, you will have access to the underlying components. Here, you will find the clutch and the variator, which need to be removed from their seat. By unscrewing the screws that hold them in place and removing the belt around them, you will be able to install the new replacement components, cover them, and ensure that everything is functioning properly.

Posted on 25 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Transmission Oil on a Suzuki Burgman 400
How to Change the Transmission Oil on a Suzuki Burgman 400
Burgman 400 To change the transmission oil on a Suzuki Burgman 400, you need to unscrew the screws securing the transmission cover, located near the rear wheel o…
How to replace the drive belt of the Suzuki Burgman 400
How to replace the drive belt of the Suzuki Burgman 400
Burgman 400 In this guide we will see the instructions that will allow us to disassemble and replace the transmission belt of the Suzuki Burgman 400 scooter. Fir…
How to Replace the Transmission on a Suzuki Burgman 400?
How to Replace the Transmission on a Suzuki Burgman 400?
Burgman 400 To replace the transmission on the Suzuki Burgman 400, loosen the screws securing the cover on the left side of the bike, near the rear wheel. Once t…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos