Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulb on a Suzuki Access 125 Scooter?

Model: Suzuki Access 125
Part: Tail light bulb

Video tutorial

In this tutorial, we will see how to replace the rear light bulb on a Suzuki Access 125 scooter, an extremely simple and quick operation. First, ensure that the instrument panel is off for safety, then unscrew the two screws located underneath the light with a hex key and separate the light from the support.

Next, remove the bulb holder, disconnect the old bulb, and connect the replacement, taking care not to touch it directly with bare hands. To reassemble everything, simply follow the reverse procedure.


Posted on 13 February 2026 by ScegliAuto


Related tutorials

How to replace the headlight bulb on the Suzuki Access 125 scooter?
How to replace the headlight bulb on the Suzuki Access 125 scooter?
Access 125 In this tutorial, we can see how to replace the headlight bulb on the Suzuki Access 125 scooter, an extremely simple and quick operation. First of al…
How to Replace the Front Headlight Bulb on a Suzuki Access 125 Scooter?
How to Replace the Front Headlight Bulb on a Suzuki Access 125 Scooter?
Access 125 In this tutorial, you will learn how to replace the front headlight bulb on a Suzuki Access 125 scooter. This operation is extremely simple and quick…
How to replace the front headlight bulb in the Suzuki Access 125 scooter?
How to replace the front headlight bulb in the Suzuki Access 125 scooter?
Access 125 In this tutorial we can see how to replace the headlight bulb in the Suzuki Access 125 scooter, an extremely simple and quick operation. First of all…

How to Replace the Belt and Rollers on the Piaggio Vespa GTS 300

This guide briefly outlines the steps to remove and replace the belt and rollers of the variator on the Piaggio Vespa GTS 300 scooter, following the instructions below. First, place your scooter on the centre stand and begin unscrewing the screws of the transmission cover to remove it; then unscrew the nut of the fan and that of the clutch bell, as shown in the video. At this point, remove the belt and then the variator, replacing the rollers found inside; install the new belt and reassemble the transmission!

Watch the video!


by ScegliAuto

More videos