Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the front headlight bulb on a Suzuki V-Strom 650, loosen the screws securing the instrument panel to its housing. The screws will be located on the sides of the panel, and once loosened, you can pull the panel from its place. This provides access to the internal part of the headlight assembly: here, detach the cover to access the bulb. The bulb can now be disconnected from the connector to attach the new one and reassemble all necessary components.

Posted on 3 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the exhaust pipe of the Suzuki V-Strom 650 XT?
How do you replace the exhaust pipe of the Suzuki V-Strom 650 XT?
V Strom 650 .. to replace the exhaust installed on the Suzuki V-Strom 650 XT by loosening the screws that fix this terminal to the appropriate supports on the right.. …
How do you replace the levers of the Suzuki V-Strom 650?
How do you replace the levers of the Suzuki V-Strom 650?
V Strom 650 .. To replace the levers of the Suzuki V-Strom 650, you need to loosen the screws that secure them to their housing on the sides of the handlebars:.. …
How do you replace the brake pads on the Suzuki V-Strom 650?
How do you replace the brake pads on the Suzuki V-Strom 650?
V Strom 650 .. The brake pads on the Suzuki V-Strom 650 can be replaced by performing the same operation for both the front and rear brakes: you will.. …

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos