Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Starter Motor on a Suzuki Burgman 400

Model: Suzuki Burgman 400
Part: Starter motor

Video tutorial

In today’s video, you will learn how to remove the starter motor on a Suzuki Burgman 400 by following the instructions below. First, lift the seat of your scooter and start by removing the upper air filter box by unscrewing the fixing screws; then locate the starter motor, which is found directly underneath.

At this point, unscrew its fixing screws and disconnect the power electrical connector to remove it, as shown in the video. All that’s left is to replace it with the new one, following the video until the end!


Updated on 11 April 2026 by ScegliAuto


Related tutorials

How to Replace the Starter Motor on a Suzuki Burgman 400
How to Replace the Starter Motor on a Suzuki Burgman 400
Burgman 400 This guide provides the main instructions on how to remove and replace the starter motor on a Suzuki Burgman 400. First, place the scooter on the cen…
How to replace the front bulb on a Suzuki Burgman 400
How to replace the front bulb on a Suzuki Burgman 400
Burgman 400 Before starting, position your Suzuki Burgman 400 on the centre stand, then turn the front wheel to the right. Next, lean down near the front headlam…
How to Reset the Oil Light on the Suzuki Burgman 400
How to Reset the Oil Light on the Suzuki Burgman 400
Burgman 400 If you own a 2005 Suzuki Burgman 400 and want to learn how to manually reset the oil light, follow this guide and apply the steps described. First, e…

How to Replace the Engine Oil and Gear Oil of the Sym Fiddle 125

It is very simple to perform the routine maintenance service by replacing the engine oil and gear oil of the Sym Fiddle 125 scooter. First, place your scooter on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then unscrew the filler screw and pour in the new oil, filling up to the maximum level mark. Now perform the same operation for the transmission oil replacement by unscrewing the drain screw located on the casing!

Watch the video!


by ScegliAuto

More videos