Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Starter Motor on a Suzuki Burgman 400

Model: Suzuki Burgman 400
Part: Starter motor

Video tutorial

This guide provides the main instructions on how to remove and replace the starter motor on a Suzuki Burgman 400. First, place the scooter on the centre stand and open the seat; remove the entire rear fairing by undoing the fixing screws and also removing the under-seat compartment.

At this point, you will be able to access the starter motor by undoing the screws and disconnecting the electrical wiring to remove it; replace the component with a new original one (or repair it), reassemble everything, and check the correct starting of the engine.


Posted on 21 March 2026 by ScegliAuto


Related tutorials

Removing the Starter Motor on a Suzuki Burgman 400
Removing the Starter Motor on a Suzuki Burgman 400
Burgman 400 In today’s video, you will learn how to remove the starter motor on a Suzuki Burgman 400 by following the instructions below. First, lift the seat of…
How to Reset the Oil Light on the Suzuki Burgman 400
How to Reset the Oil Light on the Suzuki Burgman 400
Burgman 400 If you own a 2005 Suzuki Burgman 400 and want to learn how to manually reset the oil light, follow this guide and apply the steps described. First, e…
How to replace the front bulb on a Suzuki Burgman 400
How to replace the front bulb on a Suzuki Burgman 400
Burgman 400 Before starting, position your Suzuki Burgman 400 on the centre stand, then turn the front wheel to the right. Next, lean down near the front headlam…

How to Reset the Service Light on a Honda PCX 150 Scooter

In this tutorial, you will see how to reset the service light on a Honda PCX 150 scooter, a very simple and quick operation to be performed only after completing all scheduled maintenance tasks. First, insert the key and leave it in the initial position, then press and hold the "SET" button located on the right side of the dashboard while simultaneously turning on the ignition. Keep the button pressed until the service light goes out, then restart the ignition to verify that the operation was successful.

Watch the video!


by ScegliAuto

More videos