Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Suzuki Gsx S 1000
Part: Wheel

In today’s tutorial, you will see step-by-step instructions for removing the front wheel on a Suzuki GSX-S 1000 motorcycle in simple and quick steps. First, position the front stand on the bike to lift the wheel off the ground; then unscrew the bolts of the front brake calipers to remove them from the disc, as shown in the video. Next, unscrew the central axle of the wheel using a socket spanner; loosen the fork bolts and gently extract the wheel, applying the reverse procedure for reassembly!

Updated on 28 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Fork of the Suzuki GSX-R 1000?
How to Remove the Fork of the Suzuki GSX-R 1000?
Gsx S 1000 To replace the fork of the Suzuki GSX-R 1000, loosen the nuts securing the front wheel in its housing at the base of the forks. This will allow you t…
Replacing Grips on a Suzuki GSX-S 1000
Replacing Grips on a Suzuki GSX-S 1000
Gsx S 1000 .. to remove and replace the grips on a Suzuki GSX-S 1000. First, obtain the correct new grips; then remove the side stand by unscrewing its fixing screw... …
How to replace the rear brake pads of the Suzuki GSX-S 1000
How to replace the rear brake pads of the Suzuki GSX-S 1000
Gsx S 1000 .. and remove the rear brake pads of the Suzuki GSX-S 1000 motorcycle. First, we put the motorcycle on the stand and start unscrewing the screws of the rear.. …

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos