Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, you will learn how to change the engine oil in the Suzuki GSXR 600, a very simple and quick operation to perform every 12 months. First, ensure the engine is sufficiently cool for safety. Then, place a container underneath and remove the two side fairings. Next, locate the drain bolt, unscrew it with a socket spanner, and allow all the oil in the system to drain out. Finally, remove the old filter, insert the replacement, reassemble everything, and pour in the required amount of oil through the upper fill hole.

Updated on 28 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to change the engine oil in the Suzuki GSXR 600?
How to change the engine oil in the Suzuki GSXR 600?
Gsxr 600 .. In this tutorial, you will see how to change the engine oil in the Suzuki GSXR 600, a very simple and quick operation. First, wait until.. …
How to Change the Engine Oil on a Suzuki GSXR 600
How to Change the Engine Oil on a Suzuki GSXR 600
Gsxr 600 To change the engine oil on the Suzuki GSXR 600, loosen the drain plug located at the bottom centre of the vehicle: once this is unscrewed, you can c…
How to change the engine oil in the Suzuki GSXR 600?
How to change the engine oil in the Suzuki GSXR 600?
Gsxr 600 .. In this tutorial, you will see how to change the engine oil in the Suzuki GSXR 600, a very simple and quick operation. First, ensure.. …

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos