Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Antenna on a Suzuki Swift

Model: Suzuki Swift AZG, MK 5, Rs41 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Antenna

See other generations:
Video tutorial

Today, follow these main instructions for removing and replacing the antenna on a Suzuki Swift in simple steps. First, move to the exterior and start unscrewing the antenna, removing it from the base.

If you want to remove the base, you will need to take off the headlining and unscrew the securing nut (as well as disconnect the electrical connector), as shown in the video. At this point, install the new antenna, connect it, and secure it properly; then check the operation of all radio stations!


Updated on 30 October 2026 by ScegliAuto


Related tutorials

How to Remove the Antenna from a Suzuki Swift
How to Remove the Antenna from a Suzuki Swift
Suzuki Swift (2004-2010 / MK 4, Rs41) Briefly, here are the instructions on how to remove and replace the radio antenna of the Suzuki Swift, following these simple steps. First, move to t…
How to Replace the Antenna on a Suzuki Swift
How to Replace the Antenna on a Suzuki Swift
Suzuki Swift (2017-2024 / MK 6, A2L) This guide will illustrate the process of removing and replacing the radio antenna on a Suzuki Swift in simple and quick steps. First, move to the ex…
How do you replace the antenna of the Suzuki Swift?
How do you replace the antenna of the Suzuki Swift?
Suzuki Swift (2004-2010 / MK 4, Rs41) It will be possible to replace the antenna of the Suzuki Swift by grasping the old component so that it can be turned counterclockwise: once the old …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos