Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Radio from the 2017 Suzuki Swift

Model: Suzuki Swift MK 6, A2L - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Car stereo

See other generations:
Video tutorial

Today, you will learn how to remove the radio from the 2017 Suzuki Swift. To perform this operation, you will need a plastic removal tool and a Phillips screwdriver.

Using the plastic removal tool, remove the lower dashboard cover. Then, using the screwdriver, unscrew the two screws that secure the radio screen.

Using the plastic removal tool, apply slight pressure to push the radio outwards so that you can remove it. Disconnect the radio connector and the antenna wire to remove it from its housing.


Updated on 7 November 2026 by ScegliAuto


Related tutorials

How to remove the stock radio from the Suzuki Swift
How to remove the stock radio from the Suzuki Swift
Suzuki Swift (2010-2017 / AZG, MK 5, Rs41) Below we will discover the instructions that will allow us to disassemble and replace the factory radio of the Suzuki Swift. First, we get into the c…
How to Remove the Car Radio from a Suzuki Swift
How to Remove the Car Radio from a Suzuki Swift
Suzuki Swift (2010-2017 / AZG, MK 5, Rs41) Before starting, sit in the driver's seat of your Suzuki Swift. Begin by prying and removing the air vents using a thin but sturdy tool. Next, remove…
How to Replace the Radio in a Suzuki Swift
How to Replace the Radio in a Suzuki Swift
Suzuki Swift (2004-2010 / MK 4, Rs41) Do you want to replace the radio in your Swift? Enter the cabin and let's see how to disassemble it. Remove the trim panels on either side of the rad…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos