Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the "Service" light on a Suzuki SX4?

Model: Suzuki Sx4 GY, MK 1, EY, RW - Years 2006-2014
Part: Service warning light

To reset the "Service" light on a Suzuki SX4, start by turning on the instrument panel without starting the engine. Look for the button under the instrument panel, often labeled as "TRIP" or "INFO". Hold down this button until you enter the settings menu. Once in the menu, use the button to navigate through the options until you find the maintenance or service reset option. When you locate this option, hold down the button until the "Service" light starts flashing or disappears. Release the button and turn off the instrument panel. Turn on the panel again to verify that the "Service" light has been reset correctly. If the procedure fails, refer to the owner's manual or a professional for further instructions.

Posted on 1 February 2025 by ScegliAuto

This video is currently unavailable

Related tutorials

How to reset the "Service" light on a Suzuki SX4?
How to reset the "Service" light on a Suzuki SX4?
Suzuki Sx4 (2013-2021 / JY, MK 2) To reset the "Service" light on a Suzuki SX4, turn on the instrument panel without starting the engine by turning the key in the ignition switch. Pre…
How do you reset the service indicator on the Suzuki SX4?
Suzuki Sx4 (2006-2014 / GY, MK 1, EY, RW) The Suzuki SX4 is equipped with the service light, just like many other cars, so as the scheduled maintenance deadline approaches, we will be notifie…
How to reset the tire pressure on Suzuki SX4
How to reset the tire pressure on Suzuki SX4
Suzuki Sx4 (2013-2021 / JY, MK 2) To reset the tire pressure on the Suzuki SX4, you can follow these general steps. Turn on the car: make sure all tires are inflated to the correct pr…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos